easySwitch M

This electronic relay enables the simple switching of high DC currents. By consistently reducing the on-resistance, a heat sink is no longer required and the efficiency of your system is significantly increased. This saves costs, space and installation time. With the help of the additional ribbon cable connection, many relays can be connected with very little wiring effort. The larger control voltage range enables simpler control in 48V systems. Due to the significantly reduced power consumption compared to other manufacturers, this SSR is also ideal for battery operation. The SSR is coated with a protective varnish to protect it from environmental influences and condensation.

Features:
- Very low on resistance (down to 0,15 mΩ)
- No heat sink required
- High efficiency
- Currents up to 150 A
- Wide control voltage range up to 60 V
- Very low power consumption
- Addional ribbon cable connection to allow quick
  installation
  of many SSR

The solder jumpers JP1 and JP2 can be used to select between 4 pins of the ribbon cable.
For example, the first SSR can be switched to pin 1 and the second SSR to pin 2 and so on. Only one ribbon cable needs to be connected to a control board or to our BMS. Parallel circuits are also easily possible. Simply connect them all to the same pin jumper.
 

Ribbon cable Cable	JP1	JP2
None	-	-
1 (Lipro LVP)	-	2-3
2	2-1	-
3 (Lipro OVP)	-	2-1
4	2-3	-