- Details
- Downloads
- Customer-tip
Products description
Current sensor for detecting currents to 200A
This sensor is ideal for connecting to the green controller or greenView. With the I_SENSOR_200A_U you can meassure external currents e.g. from larger inverters, which can not be directly connected to the load output of the green controller. Also, charging currents from additional chargers can be meassured. The new green controller and the greenView firmware support the sensor and will use the sensor signal in the calculation of the ampere-hour meter, the battery current and the Pin and Pout counters.
Specifications:
Supply voltage: 15V (If you don't have a greenView or a RS485_PS_ADDON_V2 please use our PS09-60-01A DC/DC - converter to supply from 9 to 60 V battery systems )
Accuracy: 1% Linearity 0,5%
Max Current: 200 A
Accessories:
File
Customers who bought this product also bought the following products:
Electric power relay, maximum continuous current 40 A, max. Switching voltage 100 V.
Cell connectors for WB LYP160AHA-B (WIDE)
Shut-off capacity: 25kA (for DC up to 220V)
Thus as main fuse suitable for most lithium battery systems.
Possible shut-off currents: 125 A, 160 A (please select above)
Electric power relays, max. switching current 160 A, peak current 470 A max (10ms). Switching voltage 60 V DC, 5-32 V control voltage, low power consumption (23mA at 5V and 45 mA at 32 V)
Mounting set for LiPro1-3 with threaded rod for cells with M12 threaded inserts. Complete set for positive and negative poles. It only needs one set per cell are ordered!
This Product was added to our catalogue on 16/02/2013.
Die Box kann unter tpl_modified_responsive/boxes/box_miscellaneous.html verändert werden. Die Sprachvariablen befinden sich in der Datei tpl_modified_responsive/lang/german/lang_german.custom.