ECS

LiPro1-6 Active V2

LiPro1-6 Active V2
For a larger view click on the thumbnail
98,77 EUR
19 % VAT incl. excl. Shipping costs
LiPro Active Length
Add to cart

Shipping time: 2-3 Working Days
Product no.: BG155
MPN: BG155
Manufacturer: ECS
More products of: ECS



  • Details
  • More images
  • Downloads
  • Customer-tip

Products description

Battery Mangment system (BMS) for cell monitoring and active load balancing (active balancing) of lithium cells.
(Suitable for LiFeYPO4, LiFePO4 and other ...)
 
Through the active charge compensation less heat is generated, so that cooling problems belong to the past. In addition, the effective capacity of the battery bank will be increased.
 
Features:
  • Less heat generation
  • More efficient than other BMS
  • Faster charge
  • Higher effective capacity of the battery pack
Areas of application:
  • Electric vehicles
  • "Home Storage" for self-consumption
  • Systems with very high charge and discharge
  
The LiPro1-6 Active V2 module is used to protect your valuable lithium cells. The module constantly monitors the cell voltages, as soon as the cell voltage of a cell is too small, it opens the safety loop for the discharge (LVP). The security loop goes through all LiPro1-6 Active modules and switches the load off (via external relay or load output of our greenController).
 
As soon as the cell voltage of a cell is too high, it opens the safety loop for overcharge protection (OVP) which switches off the charging sources (e.g. main charger, solar charge controllers, and other sources).
 
If our solar charge controller (greenController) is used, it can communicate directly via the RS485 bus. Mains chargers can be controlled by our Charger Ctr, other sources via external relay.
 
Furthermore, a temperature monitoring is available. At temperatures above + 80 ° C, both safety loops will turned off.
 
The LiPro1-6 Active V2 module also includes a charge balancer, it "takes" energy from a cell with high SOC (State of Charge) and "puts" it into a cell with lower SoC. 
 
Features: 
  • Active load balancing
  • Switch outputs with electronic relay (1A switching capacity)
  • Connection between the modules can be done by ribbon cables -> less wiring
  • Controlled by Microprocessor
  • One module per cell
  • Each module is mounted directly to the battery terminals
  • Balancer power about 0 - 8 A
  • Balancer voltage 3.60 V (default, adjustable via interface)
  • Discharge (LVP1, delayed) at 2.9 V (default, adjustable via interface)
  • Discharge (LVP2, undelayed) at 2.8 V (default, adjustable via interface)
  • LVP1 delay to prevent tripping during high inrush current / or cold cells
  • Overcharge protection (OVP) at 3.65 V (default, adjustable via interface)
  • 4 LEDs to display: Function, Error, LVP, UVP
  • Over temperature protection (adjustable default, via interface) 50 ° C
  • Maximum tolerance less than 0,1 %
  • Low power consumption: Less than 0.03 W
  • Has a galv. Isolated RS485 interface

Accessories for this product:

 

LiPro1-6 Active V2
LiPro1-6 Active V2
LiPro1-6 Active V2
LiPro1-6 Active V2
LiPro1-6 Active V2
LiPro1-6 Active V2
LiPro1-6 Active V2
LiPro1-6 Active V2
LiPro1-6 Active V2
LiPro1-6 Active V2
LiPro1-6 Active V2
LiPro1-6 Active V2
LiPro1-6 Active V2
LiPro1-6 Active V2

File

Datenblatt_liPro1_6_v2_DEDownload207.36 KB
Datenblatt
Datasheet_liPro1_6_v2_ENDownload249.3 KB
Datasheet
Datenblatt_liPro1_6_v2_DEDownload207.36 KB
Datenblatt
BD_LiPro1_x_active_v2_enDownload3.24 MB
User Manual
encrypted_lipro1_6_v2.zipDownload37.96 KB
Firmware 1.00.03 for LiPro1-6 Active V2

Customers who bought this product also bought the following products:

KAB_BAL_ACTIVE_

KAB_BAL_ACTIVE_

Prefabricated cable set for simple and fast wiring of balancing connectors (LiPro1-6 active). Set Includes fuse holder, fuse and spare fuse.

Shipping time: 2-3 Working Days
from 19,42 EUR
19 % VAT incl. excl. Shipping costs
MONTAGE-KIT_4_130AHA (Mounting-set)

MONTAGE-KIT_4_130AHA (Mounting-set)

Shipping time: 2-3 Working Days
40,98 EUR
19 % VAT incl. excl. Shipping costs
KONV_RS485_TO_WIFI_V3

KONV_RS485_TO_WIFI_V3

This converter allows you wireless access to our greenController or to our LiPro modules. Even with Android phone and tablets it is now possible to access (Tested with Samsung Galaxy S2).

As Android app any Modbus App with "Modbus RTU via TCP" Support should work. As an example "Modbus Monitor" or "Netlink" with Modbus Addon. 

The converter can also be used as wifi to RS232 converter.

NEW VERSION (V3)!

 

Shipping time: 2-3 Working Days
97,58 EUR
19 % VAT incl. excl. Shipping costs
RS485_TERM

RS485_TERM

Shipping time: 2-3 Working Days
0,99 EUR
19 % VAT incl. excl. Shipping costs
M12 Adapter Kit (forLiPro1-6 active V2)

M12 Adapter Kit (forLiPro1-6 active V2)

Adapter screw M12 for BMS Systems. 

Shipping time: 2-3 Working Days
7,95 EUR
19 % VAT incl. excl. Shipping costs
FK6_190mm

FK6_190mm

 Ribbon cable :


- 190mm length

- 6 pin

- FEMALE IDC CONNECTEUR on both sides
Shipping time: 2-3 Working Days
4,43 EUR
19 % VAT incl. excl. Shipping costs

This Product was added to our catalogue on 22/11/2021.

Categories
Quick purchase

Please enter the article no. from our catalogue.

Welcome back!
Last viewed:
SET_300AH_24V_BMS_VIS
SET_300AH_24V_BMS_VIS
from 5.712,00 EUR
19 % VAT incl. excl. Shipping costs
Features:
24V Systems »
More information on your personal page »
Manufacturer
ECS
ECS
ECS Homepage »
More products »
Shipping country
modified eCommerce Shopsoftware © 2009-2025