- Details
- More images
- Customer-tip
Products description
Electric power relay.
You may need a heatsink, please check picture with the derating diagrams.
| Input | |
|---|---|
| Input Voltage | 4 - 32 V DC |
| Turn On Voltage | > 4 V |
| Turn Off Voltage | < 1 V |
| Typ. Input current @ 4 V | 8,3 mA |
| Typ. Input current @ 5 V | 12,6 mA |
| Typ. Input current @ 12 V | 13,8 mA |
| Typ. Input current @ 24 V | 14,3 mA |
| Typ. Input current @ 32 V | 14,7 mA |
| Output | |
| Load Voltage | 0 - 30 V |
| Load Current | 0.001 - 100A |
| Load Current Peak (<10ms) | 250 A |
| Turn On Time | < 100µs |
| Turn Off Time | < 1ms |
| Leakage Current | < 0,1 mA |
| On Resitance | < 2,1mOhm |
| Others | |
| Operating Temperature | -30 bis +80°C |
| Storage Temperature | -30 bis +100°C |
| Wight | 95g |
| Isolation | >2500Vrms |
Customers who bought this product also bought the following products:
LiPro1-1 V2
3. Generation
This LiPro1-1 Module protects your Lithium (LiFeYPO4, LiFePO4) Batterie Cells.
It protects every cell against deep discharge and overcharge furthermore it has a build in balancer circuit
Ribbon cable :
- 80mm length - 6 pin - FEMALE IDC CONNECTEUR on both sides
Converter to connect the charge controller to a USB Port.
Only one converter is necessary, for all controllers on the bus.
LiPro1-2 RS485 V2
This LiPro1-2 Module protects your Lithium (LiFeYPO4, LiFePO4) Batterie Cells.
It protects every cell against deep discharge and overcharge furthermore it has a build in balancer circuit
This Version has a galvanically isolated RS485 interface and about 2 A balancing current
This Product was added to our catalogue on 22/02/2018.
Die Box kann unter tpl_modified_responsive/boxes/box_miscellaneous.html verändert werden. Die Sprachvariablen befinden sich in der Datei tpl_modified_responsive/lang/german/lang_german.custom.