This package contains all the necessary components for a lithium battery system. This system is tuned to
loads or inverters up to 200 W. The inrush current must not exceed 120 A / 1,4 kW (10 ms)!
- Cells (4 x Winston LiFeYPO4 with 40Ah/each)
- MountingSet: MONTAGE-KIT_4_40AHA
- Cell connectors (3 cell connectors to connect these cells in series for a 12V system)
- BMS (LiPro1-1_RS485_V2)
- FK6 connection wires
- Adapter screws for mounting the BMS on the cells.
- Safety shutdown, load shedding relay: SSR_30V_100A
- Safety shutdown, charge switch-off relay: SSR_30V_100A
- Current sensor charging current: 50 A
- Current sensor load current: 50 A
- greenView (in the built-on or built-in version)
- DC circuit breaker 1A for control circuits
- DC circuit breaker 10A for load circuits (with the necessary breaking capacity of > 20 kA, including 2 replacement fuses)
- Control cables
- FK6 connection cable: (FK6 cable for connecting the LiPros to each other)
- Control cable LIYY 10x0,14 mm²: 10 meters, to connect greenView
- Control cables LIYY 6x0,14 mm²: 20 meters
- Wire end ferrules
- Wago connectors
- High current cable 10mm² NSGAFÖU: 6 meters. Short-circuit proof according to VDE (double insulation) from the battery to the main fuse and the relay
- Suitable cable lugs and shrink tubing
Delivery free shipping! (within Germany)
Please choose above if you would like to get the greenView in built-on or built-in versionPlease note that any electrical installation work must be done by a licenced electrician.