PAKET_130AH_12V_BMS

This package contains all the necessary components for a lithium battery system. This system is tuned to loads or inverters up to 750 W. For a short time a load up to 1,2 kW is possible (about 10 minutes). The inrush current must not exceed 250A/ 3kW (10ms)! 

• Cells (4 x Winston LiFeYPO4 130 Ah)
• MountingSet: MONTAGE-KIT_4_130AHA
• Cell connectors (3 cell connectors to connect these cells in series for a 12V system)
• BMS (LiPro1-3_RS485_V2 or LiPro1-6 Active)
• Adapter screws for mounting the BMS on the cells.
• Safety shutdown, load shedding relay: SSR_30V_100A
• Safety shutdown, charge switch-off relay: SSR_30V_100A
• DC circuit breaker 1 A for control circuits
• NH fuse 63 A (with the necessary breaking capacity of > 10 kA, including 2 replacement fuses)
• NH fuse holder
• FK6 connection cable: (FK6 cable for connecting the LiPros to each other)
• KAB_BAL_ACTIVE4 (When selecting LiPro1-6 Active)
• Wire end ferrules 0.14 mm²
• High current cable 10 mm² NSGAFÖU: 6 meters. Short-circuit proof according to VDE (double insulation) from the battery to the main fuse and the relay
• Suitable cable lugs and shrink tubing  

At more than 30A charge current and when the maximum efficiency is required, we recommend to select LiPro1-6 Active as BMS.
Delivery free shipping (within Germany)!
Please choose above if you would like to get the greenView in built-on or built-in version.

Please note that any electrical installation work must be done by a licenced electrician.