PowerPro -209

PowerPro serves as a remote-controlled main switch and as a second protective measure if the MOSFET switch fails. Alternatively, it can also be used purely for disconnection in the event of cell overvoltage or deep discharge. The desired operating mode can be set using a rotary coding switch. PowerPro can be flange-mounted to the side of the battery pack just as easily as the SmartPro module. The module also provides a simple connection for displays (data bus feed). Two galvanically isolated electronic relay outputs provide signals for charge and load control. This makes it possible to control combination devices such as Victron Multiplus directly. When switched off, the power consumption of the battery is reduced to almost zero.

Main functions:

• Main fuse
• Control fuses
• Remote-controlled main switch
• Secondary protection
• Data bus feed for display: greenView
• Spare part for our complete Supremo battery
• Construction of own battery systems

Application:

• Traffic control technology
• Off-grid monitoring functions (power supply for level measurement stations)
• Emergency power supply for water infrastructure
• Robot vehicles
• Boats
• Power supply for special vehicles
• and much more

Product features and advantages

• Bistable relay for low power consumption
• High level of safety as mechanical relay is used as a second protective measure
• Fuse from Adler Elektrotechnik with > 50 kA breaking capacity
• Microprocessor controlled
• Alarm signaling device
• Quick and easy installation on the side of the battery on the existing threaded rods
• Simple high-current wiring with cell connector possible
• Connection option for compensation cables of active balancers (LiPro 1.6 Active)
• Versions available for 12, 24 and 48 V battery systems
• Can be perfectly combined with SmartPro and LiPro
• Main switch operation: Remote or local control possible
• Integrated fuse protection for display devices and balancer compensation cables

You can select the fuse above under rated current; a maximum rated fuse current of 300 A is permitted for this circuit board. If you require higher currents, you can use other models. A smaller fuse is useful if you want to reduce the conductor cross-sections or if the load is small and you also want to protect it.

Recommendation Fuse by cell:

Cell	Fuse	Rated continuous current
Winston 160 AHA	<= 300 A	<= 240 A
Winston 160 AHA-B	<= 300 A	<= 240 A

This version of the module is designed for cells with a total width of max 209 mm. For example for

• Winston 160AHA cells
• Winston 160AHA-B cells

The module has extensive overvoltage protection elements that protect your devices from inductive voltage peaks when switching off and from indirect lightning strikes.
 

Technical data

	PowerPro 12-209	PowerPro 24-209	PowerPro 48-209	Einheit
	Electrical data
Nominal system voltage	12	24	48	V
Max operating voltage	15	30	60	V
Max Continuous current	125			A
Max peak current	Peak 1500 A / 1ms			A
Max Continuous power	1500	3000	6000	W
Switch-on resistance typ. (measured with 150A fuse)	1.16			mΩ
Switch-on resistance max (measured with 150A fuse)	1.25			mΩ
Max fuse protection	300			A
	Overvoltage protection
Breakdown voltage	17.5	35	70	V
Total power Surge protection (Pppm) (Peak pulse power dissipation with a 10/1000 μs waveform).	20	40	80	kW
	Control system
Control voltage LVP, OVP	4.7 - 60			V
Power consumption typ.	< 30			mW
Storage time example: 60 Ah / 12 V / Winston cells	> 1			Year
	Mechanical Data
Dimensions (LxWxH) without plug	275 mm x 241 mm x 42mm Slotted holes for M8 Threaded rod Distance: 218 mm for cell widths up to max 209 mm			mm
Weight	720			g
High-current connection terminals	M8			mm
Protection class	IP00
Manufacturer:	ECS
Country of origin	Germany
Warranty	5 years

Note:
If you use a controllable load (digital inputs) such as Victron Multipplus, you can control it via the two potential-free SSRs.
In this case, you no longer need a SmartPro (provided you can do without the other features of the SmartPro)