Deutsch English

LiPro1-6 Active

LiPro1-6 Active

89,25 EUR

19 % VAT incl. excl. Shipping costs

Shipping time: 2-3 Workingd Days

89,25 EUR per
Product no.: BG074
Manufacturer: ECS
More products of: ECS

Print datasheet
New: Available from Q1 / 2015 - Pre-orders welcome
 
New battery Mangment system (BMS) for cell monitoring and active load balancing (active balancing) of lithium cells.
(Suitable for LiFeYPO4, LiFePO4 and other ...)
 
Through the active charge compensation less heat is generated, so that cooling problems belong to the past. In addition, the effective capacity of the battery bank is increased.
 
Features:
 
  • Less heat generation
  • More efficient
  • Faster charge
  • Higher effective capacity of the battery pack
Areas of application:
  • Electric vehicles
  • "Home Storage" for self-consumption
  • Systems with very high charge and discharge
  
The LiPro1-6 Active module is used to protect your valuable lithium cells. The module constantly monitors the cell voltages, as soon as the cell voltage of a cell is too small, it opens the safety loop for the discharge (LVP). The security loop goes through all LiPro1-6 Active modules and switches the load off (via external relay or load output of our greenController 100/30).
 
As soon as the cell voltage of a cell is too high, it opens the safety loop for overcharge protection (OVP) which switches off the charging sources (e.g. mains charger, solar charge controllers, and other sources).
 
If our solar charge controller is used, it can communicate directly via the RS485 bus. Mains chargers can be controlled by our Charger Ctr, other sources via external relay.
 
Furthermore, a temperature monitoring is available. At temperatures above + 80 C, both safety loops are turned off.
 
The LiPro1-6 Active module also includes a charge balancer, it "takes" energy from a cell with high SOC (State of Charge) and "puts" it into a cell with lower SoC. 
 
Features: 
  • New: Active load balancing
  • New: New switch outputs with electronic relay (1A switching capacity)
  • New: Connection between the modules can be done by ribbon cables -> less wiring
  • Microprocessor controlled
  • One module per cell
  • Each module is mounted directly to the battery terminals
  • Balancer power about 5 - 8 A
  • Balancer voltage 3.65 V (default, adjustable via interface)
  • Discharge (LVP1, delayed) at 2.8 V (default, adjustable via interface)
  • Discharge (LVP2, undelayed) at 2.6 V (default, adjustable via interface)
  • LVP1 delay to prevent tripping during high inrush current / or cold cells
  • Overcharge protection (OVP) at 3.9 V (default, adjustable via interface)
  • 4 LEDs to display: Function, Error, LVP, UVP
  • Over temperature protection (adjustable default, via interface) 80 C
  • Maximum tolerance less than 1%!
  • Low power consumption: Less than 0.1W
  • Has a galv. Isolated RS485 interface

 Downloads: 

Accessories for this product:

 

LiPro1-6 ActiveLiPro1-6 ActiveLiPro1-6 Active

Customers who bought this product also bought the following products:

greenSwitch 24/500

greenSwitch 24/500


218,81 EUR (19 % VAT incl. excl. Shipping costs)
LiPro1-3 RS485 V2

LiPro1-3 RS485 V2


This LiPro1-3 Module protects your Lithium ( LiFeYPO4, LiFePO4, ...) Batterie Cells. It protects every cell against deep discharge and overcharge furthermore it has a build in balancer circuit. This Version has a galvanically isolated RS485 interface.

48,73 EUR (19 % VAT incl. excl. Shipping costs)

48,73 EUR per

greenSwitch 12/500

greenSwitch 12/500


195,01 EUR (19 % VAT incl. excl. Shipping costs)
greenSwitch RemoteButton

greenSwitch RemoteButton


17,50 EUR (19 % VAT incl. excl. Shipping costs)
KAB_BAL_ACTIVE_

KAB_BAL_ACTIVE_


Prefabricated cable set for simple and fast wiring of balancing connectors (LiPro1-6 active). Set Includes fuse holder, fuse and spare fuse.

from 11,90 EUR (19 % VAT incl. excl. Shipping costs)
KONV_RS485_TO_WIFI_V2

KONV_RS485_TO_WIFI_V2


This converter allows you wireless access to our greenController or to our LiPro modules. Even with Android phone and tablets it is now possible to access (Tested with Samsung Galaxy S2).

As Android app any Modbus App with "Modbus RTU via TCP" Support should work. As an example "Modbus Monitor" or "Netlink" with Modbus Addon. 

The converter can also be used as wifi to RS232 converter.

59,50 EUR (19 % VAT incl. excl. Shipping costs)

Shopping cart

You do not have any products in your shopping cart yet.

Welcome back!

Newsletter subscription

E-mail address:

The newsletter can be canceled here or in your Account at any time.

Customer group


Customer group: Guest

Manufacturer information

Manufacturer