- Details
- More images
- Downloads
- Customer-tip
Products description
Battery Mangment system (BMS) for cell monitoring and active load balancing (active balancing) of lithium cells.
(Suitable for LiFeYPO4, LiFePO4 and other ...)
Through the active charge compensation less heat is generated, so that cooling problems belong to the past. In addition, the effective capacity of the battery bank will be increased.
Features:
- Less heat generation
- More efficient than other BMS
- Faster charge
- Higher effective capacity of the battery pack
Areas of application:
- Electric vehicles
- "Home Storage" for self-consumption
- Systems with very high charge and discharge
The LiPro1-6 Active module is used to protect your valuable lithium cells. The module constantly monitors the cell voltages, as soon as the cell voltage of a cell is too small, it opens the safety loop for the discharge (LVP). The security loop goes through all LiPro1-6 Active modules and switches the load off (via external relay or load output of our greenController).
As soon as the cell voltage of a cell is too high, it opens the safety loop for overcharge protection (OVP) which switches off the charging sources (e.g. main charger, solar charge controllers, and other sources).
If our solar charge controller (greenController) is used, it can communicate directly via the RS485 bus. Mains chargers can be controlled by our Charger Ctr, other sources via external relay.
Furthermore, a temperature monitoring is available. At temperatures above + 80 ° C, both safety loops will turned off.
The LiPro1-6 Active module also includes a charge balancer, it "takes" energy from a cell with high SOC (State of Charge) and "puts" it into a cell with lower SoC.
Features:
- Active load balancing
- Switch outputs with electronic relay (1A switching capacity)
- Connection between the modules can be done by ribbon cables -> less wiring
- Controlled by Microprocessor
- One module per cell
- Each module is mounted directly to the battery terminals
- Balancer power about 5 - 8 A
- Balancer voltage 3.65 V (default, adjustable via interface)
- Discharge (LVP1, delayed) at 2.8 V (default, adjustable via interface)
- Discharge (LVP2, undelayed) at 2.6 V (default, adjustable via interface)
- LVP1 delay to prevent tripping during high inrush current / or cold cells
- Overcharge protection (OVP) at 3.9 V (default, adjustable via interface)
- 4 LEDs to display: Function, Error, LVP, UVP
- Over temperature protection (adjustable default, via interface) 80 ° C
- Maximum tolerance less than 1 %
- Low power consumption: Less than 0.1 W
- Has a galv. Isolated RS485 interface
Accessories for this product:
- KONV_RS485_TO_USB
- KONV_RS485_TO_WIFI
- PS09-60-01A
- Disconnect Relais
- CHARGER-CTR-1
- greenView (visualisierung)
- greenSwitch_(Main_Switch)
- Mounting_Material
- Wiring_Material
File
BD_LiPro1_x_active_de5.72 MB
Operation Manual, German
datenblatt_lipro1_6_active_en438.58 KB
Datasheet, English
datenblatt_lipro1_6_active_de624.84 KB
Datasheet, German
ecs_kommtool_setup.exe13.27 MB
Kommtool
lipro_1_1-encrypted.zip12.07 KB
Firmware
liPro1-6.zip1.16 MB
3D model
Customers who bought this product also bought the following products:
LiPro1-2 RS485 V2
This LiPro1-2 Module protects your Lithium (LiFeYPO4, LiFePO4) Batterie Cells.
It protects every cell against deep discharge and overcharge furthermore it has a build in balancer circuit
This Version has a galvanically isolated RS485 interface and about 2 A balancing current
Shipping time: 2-3 Working Days
Battery Mangment System (BMS) for cell monitoring and active load balancing (active balancing) of lithium cells
(Suitable for LiFeYPo4, LiFePo4 and other ...).
Shipping time: 2-3 Working Days
98,77 EUR
19 % VAT incl. excl. Shipping costs
ECS assembly kit for 700Ah cells from Winston. The number of cells can be selected flexibly.
Shipping time: 2-3 Working Days
from 114,50 EUR
19 % VAT incl. excl. Shipping costs
- Heavy duty busbar box M8 300 A, red
Shipping time: 2-3 Working Days
28,56 EUR
19 % VAT incl. excl. Shipping costs
- Heavy duty busbar box M8 300 A
Shipping time: 2-3 Working Days
28,56 EUR
19 % VAT incl. excl. Shipping costs
The RS485_ADDON module is an extension for the green controller. It provides a second RS485 interface
Shipping time: 2-3 Working Days
98,77 EUR
19 % VAT incl. excl. Shipping costs
This Product was added to our catalogue on 10/12/2014.
Payment methods
Die Box kann unter tpl_modified_responsive/boxes/box_miscellaneous.html verändert werden. Die Sprachvariablen befinden sich in der Datei tpl_modified_responsive/lang/german/lang_german.custom.
ECS © 2024 | Template © 2009-2024 by modified eCommerce Shopsoftware