SET_200AH_24V_BMS_VIS

Product no.: SETxx

This package contains all the necessary components for a lithium battery system. This system is tuned to loads or inverters up to 2,5 kW. For a short time a load up to 3,5 kW is possible (about 10 minutes). The inrush current must not exceed 1000 A / 24 kW (10 ms)! The set also includes our greenView for visualizing the LiPros and as a battery monitor with current-based SOC calculation!
 

  • Cells (8 x Winston LiFeYPO4 with 200 Ah/each)
  • Mounting Set: MONTAGE-KIT_8_200AHA
  • Cell connectors (7 cell connectors to connect these cells in series for a 24 V system)
  • BMS (LiPro1-3_RS485_V2 or LiPro1-6 Active)
  • Adapter screws for mounting the BMS on the cells.
  • Safety shutdown, load shedding relay: greenSwitch 24/500
  • Safety shutdown, charge switch-off relay: greenSwitch 24/500
  • Current sensor charging current: 100 A (200 A on request)
  • Current sensor load current: 200 A (100 A on request)
  • greenView (in the built-on or built-in version)
  • DC circuit breaker 1A for control circuits
  • NH fuse 100 A (with the necessary breaking capacity of > 20 kA, including 2 replacement fuses)
  • NH fuse holder
  • FK6 connection cable: (FK6 cable for connecting the LiPros to each other)
  • Control cable LIYY 10x0,14 mm²: 20 meters, to connect greenView
  • Control cable LIYY 6x0,14 mm²: 5 meters, for connecting greenSwitch or load relay
  • KAB_BAL_ACTIVE_8 (When selecting LiPro1-6 Active)
  • Wire end ferrules 
  • High current cable 25mm² NSGAFÖU: 5 meters. short-circuit proof according to VDE (double insulation) from the battery to the main fuse and the relay
  • suitable cable lugs and shrink tubing  


At more than 30A charge current and when the maximum efficiency is required, we recommend selecting LiPro1-6 as BMS.
Delivery free shipping (within Germany)!
Please select above if you would like to get the greenView in built-on or built-in version.

Please note that any electrical installation work must be done by a licenced electrician.

Options:

  • greenView Monitoring: On-wall
  • greenView Monitoring: Wall integrated
  • Service/Initial Charge: Without
  • Service/Initial Charge: Inital Charge + Test and Testreport (+171,36 EUR)
  • BMS: LiPro1-3 RS485
  • BMS: LiPro1-6 (+416,50 EUR)

Price:

from 4.343,50 EUR

19 % VAT incl. excl. Shipping costs

SET_200AH_24V_BMS_VIS