ECS

greenSwitch 12/500

greenSwitch 12/500
For a larger view click on the thumbnail
318,92 EUR
19 % VAT incl. excl. Shipping costs
Add to cart

Shipping time: 2-3 Working Days
Product no.: BG112
MPN: BG112
Manufacturer: ECS
More products of: ECS



  • Details
  • More images
  • Downloads
  • Customer-tip

Products description

greenSwitch 12/500


greenSwitch is a remote control circuit breaker for switching large currents safely. Remote control is either via an optional control switch or via greenView.

greenSwitch has two inputs (LVP and OVP) for the direct connection of a battery management system (BMS). However, it can also be used as a normal power relay.

The device supports various operating modes when connecting a BMS, which can be selected via a dip switch:

Mode 0, LVP:
The device responds only to the LVP control signal from the BMS.
For switching loads (inverters, motors, etc.) to protect the battery from deep discharge

Mode 1, OVP:
The device responds only to the OVP control signal from the BMS.
For switching charging sources to protect the battery from overcharging

Mode 2, LVP:
Same as mode 0, but with inverted inputs.

Mode 3, OVP:
Same as Mode 1, but with inverted inputs.

Mode 4, LVP - OVP:
Both LVP (undervoltage) and OVP (overvoltage) are evaluated. Especially for users with finished system,
Which would like to convert to lithium batteries and charge and load is not easily separable due to the finished cabling.
Charging sources and loads are connected to the greenSwitch

Mode 5, LVP - OVP AUTO
Like Mode 4, however, the device automatically switches back after a protective shutdown.
If a shutdown due to deep discharge has occurred, is automatically switched back on when a
Charging source is detected.
If a shutdown due to overvoltage has occurred, it is automatically switched back on when a
Load is detected.

The last two operating modes have been specially developed for the conversion of existing lead-acid batteries to lithium technology for caravans and boats.

Switch states are indicated by LEDs on the device and the optional remote switch. When using greenView, e.g. The switching state, the temperature and the estimated current are graphically displayed on the TFT.

Further product features:

  • Water- and dust-proof housing (IP65)
  • Charge and load current up to 500 A (continuous load)
  • Impulse load current up to 1500 A (0.1 s / 10 s)
  • Temperature and overload cut-off
  • More than 10,000 switching cycles possible
  • Solid copper bars for easy and stable connection of the battery leads
  • RS485 BUS with open Modbus protocol
  • Low power consumption depending on the switching state 30-70 mW (measured at 12 V)
greenSwitch 12/500
greenSwitch 12/500

File

Bedienungsanleitung_greenSwitch_deDownload704.78 KB
Operation Manual, German
ecs_kommtool_setup.exeDownload13.27 MB
Kommtool
datenblatt_greenswitch_deDownload977.58 KB
Datenblatt, German

Customers who bought this product also bought the following products:

NEW: High-Current cell connector FLEX 69 - 79 mm, 60 mm²
Cell connector with hole spacing of approx. 69 - 79 mm for the well-known e.g. EVE / LISHEN / CALB cells with 280 - 310 Ah. Cross section 60 mm²
Shipping time: 2-3 Working Days
10,12 EUR
19 % VAT incl. excl. Shipping costs
LiPro1-2 V3

LiPro1-2 RS485 V2

This LiPro1-2 Module protects your Lithium (LiFeYPO4, LiFePO4) Batterie Cells.
It protects every cell against deep discharge and overcharge furthermore it has a build in balancer circuit

This Version has a galvanically isolated RS485 interface and about 2 A balancing current
 

 

Shipping time: 2-3 Working Days
from 41,32 EUR
41,32 EUR per
19 % VAT incl. excl. Shipping costs
ECS-MONTAGE-KIT_300AHA
ECS assembly kit for 300Ah cells from Winston. The number of cells can be selected flexibly.
Shipping time: 2-3 Working Days
from 85,68 EUR
19 % VAT incl. excl. Shipping costs
ECS-MONTAGE-KIT_700AHA
ECS assembly kit for 700Ah cells from Winston. The number of cells can be selected flexibly.
Shipping time: 2-3 Working Days
from 114,50 EUR
19 % VAT incl. excl. Shipping costs
greenFuse AE5 500V IR50kA AUTOMOTIVE
General purpose fuse for EV charging equipment.
 
  • Maximum Working Voltage: 150 VDC
  • Rated Current: 50 A - 400 A
  • Interrupt Rating: 50kA
Shipping time: 2-3 Working Days
from 14,28 EUR
19 % VAT incl. excl. Shipping costs
greenFuse AE5 SICHERUNGSHALTER BAUGR 625 und 631
  • AE5 Fuse holder for size 625 or 631
  • Dimensions: L: 96 mm x W: 30 mm H: 61 mm
  • Thread: M8
  • Bolt spacing: 71,3 mm
Shipping time: 2-3 Working Days
11,90 EUR
19 % VAT incl. excl. Shipping costs

This Product was added to our catalogue on 25/01/2017.

Quick purchase

Please enter the article no. from our catalogue.

Welcome back!
Manufacturer
Shipping country