ECS

LiPro1-1 LiFeYPO4 V2

LiPro1-1 LiFeYPO4 V2
For a larger view click on the thumbnail
Our previous price 40,13 EUR Now only 34,51 EURyou save 14% / 5,62 EUR
34,51 EUR per
19 % VAT incl. excl. Shipping costs
Add to cart

Shipping time: 2-3 Working Days
Product no.: BG095
MPN: BG095
Manufacturer: ECS
More products of: ECS



  • Details
  • More images
  • Downloads
  • Customer-tip

Products description

The LiPro1-1 Module protects your LiFeYPO4 battery cells. It protects every cell against deep discharge and overcharge. Furthermore it has a built in balancer circuit. The Module is always monitoring the cell voltage. In case of a too high cell voltage it will open the ovp (over voltage protection) loop. In case of a too low cell voltage it will open the lvp (low voltage protection) loop. Both loops can be connected with our greenController, or with Relais which can switch off the charger input or the Load. Furthermore the LiPro1-1 Module has an protection against too high temperatures. If the temperature increases over 80°C the Module will open both loops. LiPro1-1 works as a balancer too. At high cell voltage it lets flow a load current, so charging of this cell will be reduced.
The Module can be ordered with other voltage (for other cell types) and with a RS485 interface on request.

New: With our new charger-ctr-1 (see accessories), various grid chargers can be remote controlled. Thus, no more relay for switching off the load from grid chargers is required.

Features:

  • Microprocessor controlled
  • Easy installation, one module per cell
  • Mounting directly on each positive battery terminal
  • Balancer current approximately 0 mA - 1000 mA
  • Balancing voltage 3.60 V
  • Delayed over discharge protection (LVP delayed) at 2.8 V
  • Non delayed over discharge protection (LVP non delayed) at 2.6 V
  • Delay time 10 minutes (LVP delay prevents too early triggering of LVP with high inrush currents or cold cells)
  • Overcharge protection (OVP) at 3.9 V
  • 4 LEDs to display: Function, Error, OVP, LVP
  • Over-temperature protection 80 ° C
  • Maximum tolerance of limits better than 0,5 %!
  • Low power consumption less than 0.7 mA at 2.6V and a maximum of 6 mA
    (with both optocoupler switched on)
  • Version with a galvanically isolated RS485 interface available

Accessories for this product:

LiPro1-1 LiFeYPO4 V2
LiPro1-1 LiFeYPO4 V2
LiPro1-1 LiFeYPO4 V2

File

Bedienungsanleitung_liPro1_x_v2_deDownload8.17 MB
Operation Manual, German
DATENBLATT_LiPro1-1_V2_ENDownload628.28 KB
Datasheet, English
DATENBLATT_LiPro1-1_V2_DEDownload519.14 KB
Datasheet, German
liPro1-1_v2.zipDownload12.07 KB
3D model

Customers who bought this product also bought the following products:

FK6_190mm

 Ribbon cable :


- 190mm length

- 6 pin

- FEMALE IDC CONNECTEUR on both sides
Shipping time: 2-3 Working Days
4,43 EUR
19 % VAT incl. excl. Shipping costs
greenFuse AT1 150V IR20kA AUTOMOTIVE
General purpose fuse for EV charging equipment.
  • Maximum Working Voltage: 150 VDC
  • Rated Current:: 60-200 A
  • Interrupt Rating: 20 kA
Shipping time: 2-3 Working Days
from 6,55 EUR
19 % VAT incl. excl. Shipping costs
greenfuse AT1 FUSEHOLDER
  • Fuse holder for  AT1xxxx105
  • L: 70 x B: 25 x H: 44 mm
  • For thread size M6 (long hole)
  • Bolt spacing: approx.: 48,8 mm
Shipping time: 2-3 Working Days
11,90 EUR
19 % VAT incl. excl. Shipping costs
LiMax-Iso-Plate-160L
Shipping time: 2-3 Working Days
3,57 EUR
19 % VAT incl. excl. Shipping costs
MONTAGE-KIT_4_40AHA (Mounting-set)
Shipping time: 2-3 Working Days
16,40 EUR
19 % VAT incl. excl. Shipping costs
NSGAFÖU 10 mm²
NSGAFÖU cable short circuit and earth-fault-proof. Colour: black.  Voltage Rating (Uo/U): 1.8/3kV.
 
Shipping time: 2-3 Working Days
from 4,76 EUR
19 % VAT incl. excl. Shipping costs

This Product was added to our catalogue on 11/09/2013.

Quick purchase

Please enter the article no. from our catalogue.

Welcome back!
Manufacturer
Shipping country